INTRODUCTION
| Our trolley cleaning machine is mainly used in meat products processing enterprises and hot pot seasoning enterprises. It is suitable for tissues with a large number and high cleanliness requirements. The machine has the functions of cleaning and sterilization. |
The washer which can quickly clean and process the trolleys, remove the dirt on the tray, and realize the sterilization of the tray through solution (chlorine solution, etc.), the whole machine only needs one person to operate, which can save Labor. At the same time, the cleaning water is recycled, saving water.
In the daily life cycle, the trolley becomes very dirty. Meat, grease and other dirt are all objects that need to be cleaned on the trolley. Kanzda’s trolley washer has a powerful two-stage cleaning system, which can clean every part of the trolley without dead corners.
Standard features of the tray washer are:
• Powerful driving force supply: trolley washer is equipped with 304 stainless steel pump with large flow, and the cleaning process reaches two levels, design the spray system according to the specifications of the trolleys, and spray the trolley in all directions without dead corners.
• With the transmission system and guide rail which are completely consistent with the trolley, the trolley will not turn over even if it works for a long time.
• Smart filtration system with extended screen surface, matched with the nozzle diameter, to prevent clogging.
• Siemens inverter control operation
• Omron photoelectric switch to accurately measure
the residence position of the spray system.
• Tank automatic heating system, control
element “AIRTAC” liquid valve.
• Automatic disinfection system, automatically filling cleaning and disinfection solution according to water consumption.
• Kanzda’s produces different voltage washer， suitable for different countries and regions. For example: 415V / 380V / 440V / 230V
| SIZE | L2850 x W2200 x H2200 mm |
| CAPACITY | 15-40 trolleys/hour |
| PUMP CAPACITY | 3.6-24m3/ hour @ 2-5bar |
